Single Grade Lasers
Set one slope. The laser holds it.
A single grade laser slopes its beam one way, so driveways, ditches, ramps and pipe runs fall the way you planned. Start with the three things that decide it: brand, slope capacity and range.
Single grade in 30 seconds
Watch one surface go from level, to sloped one way, to sloped two ways. Tap a picture to jump to it. A single grade laser does the first two: level and single slope. Need two-way slope? See dual grade lasers.
Two numbers decide the series: slope capacity, the steepest grade the laser holds (2% = 2 ft of fall per 100 ft), and working range, the circle it covers with a receiver. You can work half of the range from the laser.
Every single grade series, side by side
Each card leads with slope capacity and range, in the same order, so you can compare at a glance. Best sellers are flagged from what contractors actually buy here.

Spectra Precision
Two single grade series: the everyday best seller and a long-range precision laser.- GL412N: +15% (down to -10%) on one axis, 2,600 ft, with the HL760 digital readout receiver in most kits.
- GL710: Long range and highly accurate: +25%, 3,000 ft, 8 arc seconds, machine control ready.
Spectra GL412N
Above 9% the laser needs a pre-tilt (Spectra user guide).

Spectra GL710
Self-levels over the whole grade range (Spectra datasheet).

Topcon
Two single grade series. The difference is slope reach, range and how you control it.- RL-HV1S: ±5% on the X axis, 2,625 ft. Run it from the Bluetooth app; also lays out vertical.
- RL-200 1S: Steeper (up to +25%), longer range (3,609 ft) and ±7 arc seconds.

Topcon RL-HV1S
Steeper only by tilting the tripod, up to ±15% (Height Alert is lost).

Topcon RL-200 1S
Find your series in four taps
Tap what matters. Leave the rest on Any.
Single grade laser FAQ
What is a single grade laser?
A rotary laser that holds a slope in one direction. You type the grade in and the laser tilts its beam to match, so a driveway, ditch, ramp or pipe run falls the way you planned. It also works dead level.
Single grade or dual grade: which do I need?
Single grade sets a slope one way: driveways, ditches, ramps, sidewalks and simple drainage. Dual grade sets slope two ways at once, which parking lots, pads and sports fields usually need. If you only ever slope one way, a single grade laser costs less and does the job.
How much slope capacity do I need?
Pick a laser that reaches past the steepest grade you set. Drainage is usually 1 to 2%; ditches, ramps and embankments run steeper. On this page, slope capacity runs from about 5% to 25%.
What does working range mean?
Working range is the diameter of the circle the receiver can pick up the beam in. Half of it is how far you can work from the laser: a 2,600 ft laser covers about 1,300 ft in every direction.
Can a single grade laser work level too?
Yes. Every laser on this page self-levels for flat work like slabs, footings and floors, then slopes one axis when you enter a grade.
Which single grade lasers do you carry?
Spectra Precision GL412N and GL710, and Topcon RL-HV1S and RL-200 1S. We are an authorized dealer for both brands.


Tell us the slopes you set and the size of your jobs. We will match the laser, receiver, rod and tripod before you order.
Call 1-877-866-5721Experience the value of Great Customer Service!