Spectra GL710 Single Grade

Easy to use, one-man operation, GL710 is a single grade laser accurate up to 900m (3,000 feet) diameter.
With a -0.5% to +25% grade, the GL710 is a great choice for general construction, site prep, trenching and pipe-laying applications. Each unit comes with a laser receiver as standard, a rechargeable NiMH battery pack and charger, and the best service and support in the industry. Fast set-up, high accuracy and long range equals more productivity.
Available in 3 kits: build yours below.

One grade, set and held across 3,000 feet.
All three GL710 kits have the same laser, the 1445-2900 NiMH battery set, the charger and the carrying case. What changes is the receiver: the HL700 for a grade rod, or the CR600 or CR700 for a grade rod or a machine. Pick yours, then pair it with the tripod and grade rod you want.
Self-levels across the whole grade range (Spectra GL700 user guide).
Genuine Spectra Precision kitsBuild your GL710
Every kit starts with the GL710 single grade laser, the rechargeable battery pack, the charger and the carrying case. Pick the receiver, then add the tripod and grade rod you want, and we will show you the whole kit and one price.
Pick your receiver
The laser is the same in all three kits. Choose the HL700 if you check grade from a rod; choose the CR700 or the CR600 if the receiver will also ride on a machine.
Tap a receiver to start building your kit.
Spectra HL700
- Digital readout of how far off grade you are, over the middle 4 inch
- Five accuracy settings, 1/32 to 1/2 inch
- Waterproof and dustproof to IP67; 60+ hours on two AA batteries
- 3-year Spectra warranty on the receiver
- Includes C70 rod clamp

Spectra CR600
- Mounts on a grade rod, or on a machine with the magnetic mount
- LCD readout plus high / on-grade / low LEDs
- Die-cast magnesium housing, rated for a 10 ft drop onto concrete
- 2-year Spectra warranty on the receiver
- Includes rod clamp and magnetic mount

Spectra CR700
- Numeric readout plus blue / green / red grade LEDs
- Mounts on a grade rod or a machine: C70 rod clamp and C71 magnetic mount included
- Waterproof and dustproof to IP67, warranted for a 10 ft drop
- 3-year Spectra warranty on the receiver
- Its radio features (Grade Match, PlaneLok, Axis Alignment, Fingerprint) need a radio laser and do not work with the GL710
Rod and tripod
See every GL710 spec in 2 minutes
Range, grade, accuracy, power, receivers and kits: every number from Spectra’s GL700 documents, with English captions. Watch on YouTube
What the Spectra GL710 is used for

Set one grade across the pad and check it from anywhere within 1,500 ft of the laser, a 3,000 ft circle.
Build a kit for this jobDial the fall into the grade axis, anywhere from -0.5% to +25%, and dig to the beam instead of to a string line.
Build a kit for this jobHold the same grade along the run. Active temperature compensation keeps the beam from drifting as the day warms up.
Build a kit for this jobLevel or a single slope for building pads, footings and slabs, set up by one person.
Build a kit for this jobPut the CR700 or CR600 on the machine with its magnetic mount and run the laser at 600 or 900 rpm so the display keeps up with the blade.
Build a kit for this jobIt self-levels across the whole grade range, so setup is the same every morning: tripod, power, enter the grade.
Build a kit for this jobApplications from the Spectra Precision GL700 series brochure.
The complete Spectra GL710 kit chart
Every current GL710 kit we sell, side by side.
| Kit | What is in it | Price | |
|---|---|---|---|
| GL710Spectra Precision GL710 Single Grade Laser package with HL700 Receiver | HL700 rod receiver + C70 clamp NiMH pack + charger Carrying case | $4,560.00 | View kit → |
| GL710-10Spectra Precision CTO-GL710-10 Single Grade Laser package with CR600 Receiver | CR600 rod / machine receiver + clamp + magnetic mount NiMH pack + charger Carrying case | $4,760.00 | View kit → |
| GL710-14Spectra Precision GL710-14 Single Grade Laser package with CR700 Receiver | CR700 rod / machine receiver + clamp + magnetic mount NiMH pack + charger Carrying case | $4,710.00 | View kit → |
Every GL710 kit includes the GL710 laser, the receiver and its mount, the NiMH battery pack, the charger, the carrying case and the manual. Add a tripod and grade rod in the kit builder above.
Spectra GL710 specifications
| Grade | Single axis, -0.5% to +25% |
|---|---|
| Self-leveling | Automatic, across the whole grade range (up to 25%) |
| Working range | 3,000 ft (900 m) diameter |
| Accuracy | Servo deadband 4.6 arc seconds; grade resolution 0.001% |
| Rotation speed | 300 / 600 / 900 rpm |
| Laser | Red, 658 nm, Class 2 |
| Power | Rechargeable NiMH pack (six D-cells); alkaline D-cells work as an emergency backup |
| Recharge time | 6 hours maximum |
| Operating temperature | -4°F to 122°F (-20°C to 50°C) |
| Water | Completely sealed and waterproof |
| Tripod mount | 5/8-11 standard |
| Remote | None (the radio remote is on the GL722) |
| Warranty | 2 years, Spectra (calibration not covered) |
From the Spectra Precision GL700 series brochure and the GL700 series user guide (PDF).
GL710 FAQ
Which GL710 kit should I buy?
Start with the receiver. Pick the GL710 kit with the HL700 if you check grade from a rod. For a receiver that also goes on a machine, pick the GL710-14 with the CR700 (numeric readout, 5-inch capture height, 3-year warranty) or the GL710-10 with the CR600; both come with a rod clamp and a magnetic mount. Then add a tripod and a grade rod in the kit builder, or skip them if you have your own.
What is the grade range on the GL710?
Single axis, -0.5% to +25%. There is no second grade axis on a single grade laser. If you need grade on two axes at once, look at the GL720 or GL722.
How far does the GL710 reach?
3,000 ft (900 m) in diameter, the same as the rest of the GL700 series. The range belongs to the laser, not the receiver.
What rotation speed should I use?
The GL710 runs at 300, 600 or 900 rpm. Any of them works on a grade rod. With a machine receiver, use 600 rpm or faster: the faster the head spins, the more often the beam crosses the receiver and the more often the operator display updates.
Which receivers work with the GL710?
The Spectra Precision HL700 and CR600, and the Trimble LR410 machine receiver, according to Spectra. Our GL710-14 kit pairs it with the Spectra CR700, which works as a rod or machine receiver; its radio features (Grade Match, PlaneLok, Axis Alignment, Fingerprint) need a radio laser and do not work with the GL710.
Does the GL710 have a radio remote?
No. The radio remote, PlaneLok, Grade Match and Automatic Axis Alignment are GL722 features. The GL710 is the straightforward grade laser: set it up, set your grade, work to it.
Does the GL710 run on rechargeable batteries?
Yes. Every GL710 kit ships with the 1445-2900 NiMH battery set and the 1445-2093 charger. Alkaline D-cells can be used as an emergency backup, and recharging takes up to 6 hours.
Inches or tenths rod?
Inches (feet, inches and eighths) is what most building and concrete crews read. Tenths (feet, tenths and hundredths) is common in site work and surveying.
What warranty does the GL710 have?
Two years from Spectra on the laser. Calibration is not covered by the warranty and is the owner responsibility. The HL700 and CR700 receivers have 3-year Spectra warranties and the CR600 has 2 years. Contractors-Tools.com is an authorized Spectra Precision dealer.

Tell us the work you do and we will match the receiver, rod and tripod before you order. Real people, real laser experience.
Call 1-877-866-5721Experience the value of Great Customer Service!