Topcon RL-HV2S Dual Grade

Dual slope, level and vertical. Run it from your phone.
Every RL-HV2S kit has the same laser. What changes is the receiver (Topcon LS-80X, LS-110D, or the Spectra HL760 hybrid) and whether a rod and tripod come with it. Here is each choice, then every current kit side by side.
Up to ±15% on one axis by tilting the tripod.
Genuine Topcon kitsBuild your RL-HV2S
Every kit starts with the RL-HV2S dual slope laser and its hard case. Answer a few quick questions and we will show you your exact kit and price.
Pick your receiver
The receiver is the part you hold on the rod. It is the biggest difference between RL-HV2S kits.
Tap a receiver to start building your kit.

LS-80X
- Beam position on an LCD on both sides
- Audible tone, fine or coarse sensitivity
- IP66, up to 120 hours on 2 AA batteries
- Includes Bracket Holder 6 rod bracket

LS-110D
- Shows how far you are off grade, front and back
- Rubber protective housing
- Up to 45 hours on one AA battery
- Includes Holder-110 rod bracket

Spectra HL760
- The biggest capture window here
- Digital readout of how far off grade you are
- IP67, 60+ hours on batteries
- Includes C70 rod clamp with bubble vial
Alkaline or rechargeable
Rod and tripod
The complete Topcon RL-HV2S kit chart
Tap your choices to narrow the list. Every current RL-HV2S kit we sell is here.
| Kit | What is in it | Price | |
|---|---|---|---|
| -RL-HV2S-DB-1051612-BLTopcon RL-HV2S-BL Self-Leveling Dual Grade Laser DB Kit | No receiver Laser only | $1,650.00 | View kit → |
| RL-HV2S RB 1051612-BCCTopcon RL-HV2S-BCC Self-Leveling Dual Grade Laser RB Kit with No Receiver, Carry | No receiver Laser + case | $1,850.00 | View kit → |
| -RL-HV2S-DB-1051612-21Topcon RL-HV2S Self-Leveling Dual Grade Laser DB Kit with LS-80X Receiver and Al | LS-80X Alkaline D cells Laser kit | $1,785.00 | View kit → |
| -RL-HV2S-DB-1051612-21-K1Topcon RL-HV2S Self-Leveling Dual Grade Laser DB Kit with LS-80X Receiver, Tenth | LS-80X Alkaline D cells Tenths rod + tripod | $1,975.00 | View kit → |
| -RL-HV2S-DB-1051612-21-K2Topcon RL-HV2S Self-Leveling Dual Grade Laser DB Kit with LS-80X Receiver, Inche | LS-80X Alkaline D cells Inches rod + tripod | $1,975.00 | View kit → |
| -RL-HV2S-DB-1051612-21-ET1Topcon RL-HV2S Self-Leveling Dual Grade Laser DB Kit with LS-80X Receiver, Tenth | LS-80X Alkaline D cells Tenths rod + elevator tripod | $2,175.00 | View kit → |
| -RL-HV2S-DB-1051612-21-ET2Topcon RL-HV2S Self-Leveling Dual Grade Laser DB Kit with LS-80X Receiver, Inche | LS-80X Alkaline D cells Inches rod + elevator tripod | $2,175.00 | View kit → |
| RL-HV2S RB 1090052-01Topcon RL-HV2S Self-Leveling Dual Grade Laser RB Kit with LS-110D Receiver and R | LS-110D Rechargeables included Laser kit | $2,050.00 | View kit → |
| RL-HV2S RB 1090052-01-K1Topcon RL-HV2S Self-Leveling Dual Grade Laser Complete Kit with LS-110D Receiver | LS-110D Rechargeables included Tenths rod + tripod | $2,195.00 | View kit → |
| RL-HV2S RB 1090052-01-K2Topcon RL-HV2S Self-Leveling Dual Grade Laser Complete Kit with LS-110D Receiver | LS-110D Rechargeables included Inches rod + tripod | $2,195.00 | View kit → |
| RL-HV2S RB 1090052-01-ET1Topcon RL-HV2S Self-Leveling Dual Grade Laser Complete Kit with LS-110D Receiver | LS-110D Rechargeables included Tenths rod + elevator tripod | $2,395.00 | View kit → |
| RL-HV2S RB 1090052-01-ET2Topcon RL-HV2S Self-Leveling Dual Grade Laser Complete Kit with LS-110D Receiver | LS-110D Rechargeables included Inches rod + elevator tripod | $2,395.00 | View kit → |
| RL-HV2S RB 1051612-22-PROTopcon HYBRID RL-HV2S Self-Leveling Dual Grade Laser Kit Deluxe Spectra HL760 Re | HL760 Rechargeables included Laser kit | $2,195.00 | View kit → |
| RL-HV2S RB 1051612-22-K1-PROTopcon HYBRID RL-HV2S Self-Leveling Dual Grade Laser Complete Kit with Spectra H | HL760 Rechargeables included Tenths rod + tripod | $2,395.00 | View kit → |
| RL-HV2S RB 1051612-22-K2-PROTopcon HYBRID RL-HV2S Self-Leveling Dual Grade Laser Complete Kit Deluxe Spectra | HL760 Rechargeables included Inches rod + tripod | $2,395.00 | View kit → |

RL-HV2S machine control kit
The same laser paired with an LS-B200W machine receiver, plus a rod, tripod and LS-100D receiver for checking grade. Call us and we will match it to your machine.
From $4,895 See the machine control kit →
Topcon RL-HV2S specifications
| Slope | Dual slope, about ±5% on both axes (up to ±15% on one axis by tilting the tripod) |
|---|---|
| Accuracy | ±10 arc seconds (1/16 inch at 100 ft), horizontal and vertical |
| Working range | 2,625 ft diameter with receiver |
| Modes | Horizontal, dual slope, vertical |
| Phone control | Bluetooth 5.0, Topcon Laser Manager app |
| Rotation speed | 300 / 600 rpm |
| Laser | Visible red, 635 nm, Class 1 |
| Battery life | About 120 hours alkaline, 65 hours rechargeable |
| Dust and water | IP66 |
| Warranty | 5 years, Topcon |
From Topcon’s RL-HV manual and brochure. Range is with a receiver.
RL-HV2S FAQ
Which RL-HV2S kit should I buy?
Pick the receiver first: the LS-80X (2 inch capture height) comes in the alkaline kits, the LS-110D (3.5 inch, digital readout) and the Spectra HL760 (5 inch, digital readout) in the rechargeable kits. Then decide whether you want a 15-foot rod and tripod, in inches or tenths. The chart above narrows it to the matching kits.
How much slope can the RL-HV2S set?
Plan on about 5% on both axes with the laser set level on the tripod. Steeper grades, up to 15% on one axis at a time, are possible by tilting the tripod.
Can I control it from my phone?
Yes. The RL-HV2S has Bluetooth and works with the free Topcon Laser Manager app on iOS and Android, so you can set grade and change settings from your phone instead of a separate remote.
Does the RL-HV2S do vertical work?
Yes. It works horizontal, on dual slope, and laid on its side for vertical layout and alignment.
What is the range of the RL-HV2S?
Up to a 2,625 ft working diameter with the receiver, so you can work about 1,300 ft from the laser in any direction.
How accurate is it?
Plus or minus 10 arc seconds, horizontal and vertical. That is about 1/16 inch at 100 ft.
How long do the batteries last?
About 120 hours on four alkaline D cells, or about 65 hours on the rechargeable battery pack, according to Topcon.
Inches or tenths rod?
Inches (feet, inches and eighths) is what most building and concrete crews read. Tenths (feet, tenths and hundredths) is common in site work and surveying. Both are 15-foot SitePro aluminum grade rods.
Can I run a machine with it?
Yes. The RL-HV2S machine control kit pairs the laser with an LS-B200W machine receiver. See the machine control kit above, or call us and we will match it to your machine.
What is the hybrid kit?
It pairs the Topcon RL-HV2S with the Spectra HL760 digital readout receiver: a 5 inch capture window and a digital readout of how far off grade you are. The HL760 radio features, like Grade Match and PlaneLok, work only with Spectra lasers.
What warranty does the RL-HV2S have?
Topcon backs the RL-HV2S laser with a 5-year warranty. Contractors-Tools.com is an authorized Topcon dealer.

Tell us the work you do and we will match the receiver, rod and tripod before you order. Real people, real laser experience.
Call 1-877-866-5721Experience the value of Great Customer Service!
RL-SV2S → RL-HV2S
Looking for the Topcon RL-SV2S?
Orders ship as the current RL-HV2S kit: newer model, made in Japan.
Topcon replaced the RL-SV2S with the RL-HV2S, now made in Japan. Every RL-SV2S kit we listed is below, each with the current RL-HV2S kit that replaces it. You can still order any of them, or call 1-877-866-5721 and we will match the kit to your job.
313990772
RL-SV2S RB kit with the LS-100D digital receiver, rechargeable batteries
313990778
RL-SV2S RB kit with the LS-100D digital receiver, rechargeable batteries
| Topcon RL-SV2S → RL-HV2S Dual Grade Laser Replacements | ||
| RL-SV2S kit | Current RL-HV2S kit and price | |
|---|---|---|
| 313990752 DISCONTINUEDRL-SV2S DB, LS-80L, alkaline | → | 1051612-21 NEWRL-HV2S, LS-80X, alkaline$1,770.00 |
| 313990758 DISCONTINUEDRL-SV2S DB, LS-80L, alkaline | → | 1051612-21 NEWRL-HV2S, LS-80X, alkaline$1,770.00 |
| 313990772 DISCONTINUEDRL-SV2S RB, LS-100D, rechargeable | → | 1090052-01 NEWRL-HV2S, LS-110D digital, rechargeable$2,050.00 |
| 313990778 DISCONTINUEDRL-SV2S RB, LS-100D, rechargeable | → | 1090052-01 NEWRL-HV2S, LS-110D digital, rechargeable$2,050.00 |
| 313990738 DISCONTINUEDRL-SV2S RB, LS-80X, rechargeable | → | 1051612-21 NEWRL-HV2S, LS-80X, alkalineor 1090052-01 (LS-110D digital, rechargeable)Orders ship as 1051612-21 plus a rechargeable battery set.$1,770.00 |
| All laser prices are discounted in shopping cart | ||
Already run an RL-SV2S?
Keep it working. We still support it.
- Rechargeable battery holder for your RL-SV2S: DB-74C rechargeable battery holder (313680402), $85.00, the holder the RL-SV2S shipped with. Current RL-HV2S kits ship with the DB-82 holder.
- Manual: Topcon RL-SV2S instruction manual (PDF), which covers the LS-80L receiver and RC-60 remote too
- Training video: Topcon RL-SV2S training: setup, slope, masking and the RC-60 remote
- Receiver bracket: the Holder 6 fits both the LS-80L and the current LS-80X
RL-SV2S Questions
Is the Topcon RL-SV2S discontinued, and what replaced it?
Yes. Topcon phased out the RL-SV2S when it moved production to Japan, and the RL-HV2S is the current Topcon dual grade laser, now made in Japan. The RL-SV2S kits with the LS-80L or LS-80X receiver map to 1051612-21 (RL-HV2S, LS-80X), and the LS-100D kits map to 1090052-01 (RL-HV2S, LS-110D). The chart above shows each one. Orders ship as the current RL-HV2S kit: newer model, made in Japan.
Will RL-SV2S accessories (DB-74C battery holder, case, receiver bracket) work with the RL-HV2S?
Battery holder: the DB-74C rechargeable battery holder (313680402) is the rechargeable holder the RL-SV2S shipped with, and the one to order for an RL-SV2S. Current RL-HV2S kits ship with the DB-82 battery holder, which takes four D-cell alkalines or the BT-79Q rechargeable pack. Receiver bracket: Topcon shows the same Holder 6 bracket for the LS-80L in the RL-SV2S manual and for the LS-80X in the RL-HV manual. Case: both lasers measure 177 x 196 x 217 mm in Topcon's manuals, and every RL-HV2S kit ships with its own hard case. Call 1-877-866-5721 and we will check any other part.
What is the difference between the RL-SV2S and the RL-HV2S?
Both are self-leveling dual grade lasers with up to ±5% slope on X and Y in normal use (up to ±15% on one axis at a time with the tripod legs cheated), a 2,600 ft (800 m) working diameter, 1/16 inch at 100 ft accuracy, IP66 and a 5-year warranty. The RL-SV2S sets grade from its panel or the RC-60 remote and is a Class 3R laser. The RL-HV2S adds the Laser Manager app over Bluetooth and is a Class 1 laser.
Where can I get the RL-SV2S manual and training video?
Right here: the Topcon RL-SV2S instruction manual (PDF), which covers the LS-80L receiver and RC-60 remote, and Topcon's RL-SV2S training video.