The Topcon RL-H4C auto-leveling laser level combines precision, versatility and value in one job site tough package. Its super-fast self-leveling motors are accurate to +/-10 arc seconds meaning whether you're checking grade or setting batter boards you are going to be accurate the first time. Its high-power 2.4mW diode means you have a 2,600' diameter working range (with detector use) making it a great reference for machine mounted receivers. The 635nm visible beam means it can even be used for interior alignment applications from setting piers and decking, to wall and even cabinet alignment. All of these features makes the Topcon RL-H4C Laser more than twice the laser offered by anyone else.
Topcon RL-4HC TOP FEATURES
Self-Leveling Horizontal Beam
Long Range Operation 2,600 ft diameter
High Horizontal Accuracy 1/16-inch @ 100-feet
Simple, intuitive manual slope capability
Tough IP66 Rating - Dust and Water Rating
Self-Leveling Range ± 5 degrees
Long battery life - 100 hours
Out of Level Notification
Topcon RL-4HC (313980772) Laser Kit INCLUDES
RL-H4C Horizontal Laser
LS-80L Long Range Laser Receiver Sensor 313540702
Receiver Rod Clamp Holder 6 312890112
(4) D-Cell Alkaline Batteries
Rugged Hard Shell Carrying Case
5-Year Warranty Guarantee
MULTI-PURPOSE LASER Grading, excavating and general construction projects are perfect applications for the RL-4HC. With the added "Slope Matching" feature, check grade on all your flat and slope work. The 600 rpm rotation speed makes the Topcon RL-4HC a great match with any machine mounted laser sensor.
EASY TO USE With electronic self-leveling you press the power button and go right to work in seconds. If the TOPCON RL-4HC gets disturbed on the job it re-levels itself automatically. The Self-Leveling motors are accurate to ± 10 arc seconds.
LONG RANGE OPERATION Need to shoot elevations up to 1,300 feet from your laser? No problem, this TOPCON RL-4HC has a workable power and range of 2,600 feet diameter on the jobsite.
ALL WEATHER DEPENDABILITY With the IP66 rating, the TOPCON RL-4HC is JOBSITE TOUGH and can withstand dust, a sudden shower and even a torrential rainfall.
5-YEAR GUARANTEE The TOPCON RL-4HC Laser comes with a FIVE YEAR GUARANTEE. Topcon is backing up this reliable, accurate laser with the best factory warranty in the industry.
Topcon LS-80L LONG RANGE LASER SENSOR New laser sensor LS-80L offers increased working range* even with other Topcon rotating lasers. It indicates the laser beam position with two LCD's on both sides plus audible tone. The LCD icons also notify the HI Alert and Low Battery warnings of the RL-H4RC laser.
The Topcon LS-80L Laser Receiver Sensor Detector is able to allow you to have a longer range when using a red beam rotary laser. The unit can be adjusted for either a fine or course band, which will help improve the accuracy. It has an audible notice for the height, to make sure it is adjusted properly. You can select from 11 different channels to display the data on the LCD display.
With a rating of IP-66, the Topcon LS-80L Laser Receiver Sensor Detector is protected against dust and water. The unit is in a rubber case, so it is also protected against dropping it. It will stand up to a variety of job conditions. It can also be mounted with a Holder 6 bracket, so it will be more stable.
The Topcon LS-80L Laser Receiver Sensor Detector runs on two AA batteries. It will run for up to 120 hours, allowing for plenty of work time on the job site. It will also shut down after 30 minutes if it hasn't been used, to help save the battery life.
Topcon LS-80L Receiver FEATURES
Increase range of rotary lasers
Fine or course sensitivity
IP-66 rating against dust and water
Uses AA batteries
Low battery alert
30 minute shut down
2-inch capture window
*Approximately 20 percent increase.
TOPCON LS-80L Laser Receiver SPECIFICATIONS
Working Range (diameter)
2,500 feet with the RLHC, RL-SV2S, and RL-200 Series Lasers
Vertical Detecting Range
LCD Digital Readout Range
Horizontal Detecting Range
Strobe Light Suppression
Units / Measurements
mm / cm / inch / fractional inch
Grade Resolution Settings
±0.02 inch ±0.05 inch ±0.10 inch ±0.20 inch ±0.50 inch
LCD Grade Indicators
LED Grade Indicators
Orange, Green, Red (On/Off selectable)
LCD on each side
Loud / Low / Off selectable
HI Alert, Low Battery (for the RL-4HC, RL-SV2S, and RL-200 Series)
One AA/LR6 dry-cell battery
Up to 45 hours with alkaline batteries
Battery Level indicator
Approximately 30 minutes
-4ºF to 122ºF
Dimensions ( L x W x H )
Two Round Magnets on Top
Receiver Sensor Bracket
If you need assistance or have questions regarding laser products, or applications give us a call at 1.877.866.5721