Spectra Precision · GL700 series parts · 1446-8801S
Receiver-to-Remote Cable For The GL722.
The 4 m coiled cable that links the CR600 receiver to the RC703 radio remote for Axis Alignment, Grade Matching and PlaneLok.
1446-8801S · Connector Cable
What’s in the box
What You Receive.
- Spectra 1446-8801S connector cable, 4 m (12 ft), with a receiver clamp and a remote clamp
- Receiver, remote and laser are not included
The part

Spectra Precision 1446-8801S Cable connects CR600 Receiver to RC703 Remote Control
On a GL722 the receiver and the RC703 radio remote ride the grade rod together. This cable carries the grade-display signal from the receiver to the remote, which talks to the laser by radio. Without it the laser cannot use the receiver to align itself.
Spectra’s guide numbers the parts: (1) mounting guides that fit the channels on the receiver or remote, (2) contacts that carry the signal, (3) the receiver clamp, (4) the 4 m (12 ft) cable and (5) the remote clamp.
What it runs
Three Jobs The Cable Makes Possible.
- Axis Alignment — replaces the sighting scope and vernier base: put the rod on the hub and the laser turns its grade axis to it electronically.
- Grade Matching — dial in the approximate grade, benchmark the rod near the laser, set it on the existing grade, and the laser finds and holds that grade.
- PlaneLok — the receiver stays mounted at the elevation you want and the laser keeps watching it, for work as tight as runways.
Spectra: these modes need the radio remote and the hand-held receiver, usually on a grade rod 20–150 m (60–500 ft) from the laser.
Fit
Spectra 1446-8801S Fits These Lasers.
- Spectra GL722 dual grade laser
- Spectra GL722IR
- Spectra GL722-10
- Spectra GL722-BCR (laser with RC703, no receiver)
Not for the GL710 or GL720: they have no radio remote.
Often ordered together
Other GL700 Series Parts.
Straight answers
Spectra 1446-8801S — Straight Answers.
What does the Spectra 1446-8801S cable do?
It connects the hand-held receiver to the RC703 two-way radio remote so the grade signal from the receiver reaches the remote, and through it the laser. That link is what runs the GL722’s automatic alignment modes.
Which lasers is it for?
The radio-equipped GL700 series: GL722, GL722IR and GL722-BCR, which work with the RC703 remote. The GL710 and GL720 have no radio remote, so they do not use it.
How long is the cable?
4 m (12 ft), coiled, with a clamp at each end, per Spectra’s GL700 Series user guide.
When do I need it?
For Axis Alignment, Grade Matching and PlaneLok. Spectra says those modes need the radio remote and the hand-held receiver, usually mounted on a grade rod 20 to 150 m (60 to 500 ft) from the laser.
How do I install it on the remote?
Put the small key of the clamp into the guide on the back of the RC703, then clip the top part of the clamp into the guide on the front. The other clamp fits the mounting channels on the receiver.
The remote says Bad Receiver Cable. What now?
Spectra’s fix is to check, clean and reattach the cable between the remote control and the receiver. If the contacts are clean and it still shows, the cable is the part to replace.
Downloads — Spectra Precision GL700 Series
Spectra Precision’s own documents, free to download. Authorized Spectra Precision dealer — Contractors-Tools.com.
GL700 Series Complete User GuideConnector cable, radio remote, Axis Alignment, Grade Matching and PlaneLok, troubleshootingDownload PDF →GL700 Series Guía del usuario (Español)The complete GL700 series user guide in SpanishDownload PDF →GL700 Series Quick ReferenceKeypad and remote functions at a glanceDownload PDF →Call 1-877-866-5721
Family owned and operated. We set these systems up every week — tell us the machine and the laser you are running and we will spec it before you order.
Experience the value of Great Customer Service!