Spectra GL722 Dual Grade

Spectra Precision GL722 dual slope grade laser with RC703 radio remote on a graded jobsite with a motor grader: 3,000 ft diameter, 750 ft remote range, 2-year warranty
Used for
General constructionSite preparationRoad constructionLaser machine controlGrading and excavationParking lots and building pads

The Spectra Precision GL722 dual grade laser is one of the most advanced grade lasers on the market.

The long range operation, advanced radio remote, grade matching and Automatic Axis Alignment features mean that you can do quick but highly accurate set-ups for any grade application. With the GL722’s powerful, long range remote control, it takes one person to accurately set up and operate the grade laser. Even grade reverse is done in an instant.

You can automatically control all the transmitter’s functions using the remote, even whilst sitting in the cab of your machine. Grades can be changed on the fly up to 750ft from the transmitter. With a grade range of ±10% in the X-axis and -0.5 to +25% in the Y-axis, combined with a 3,000 feet operating range no job is too small for this laser. Automatic Axis Alignment can be done up to 500ft from the transmitter, providing accurate set-up and eliminating the need to climb a ladder to try and align the laser to your grade hub.

Available in 3 kits: build yours below.
Spectra Precision Authorized Dealer: Contractors-Tools.com
Spectra Precision GL722 dual grade laser kit with the RC703 radio remote and the CR600 receiver
Spectra GL722 at a glance

Two grades, set from 750 feet away.

All three GL722 kits have the same laser, the RC703 two-way radio remote, the CR600 rod and machine receiver, the 1445-2900 NiMH battery set, the charger and the carrying case. The GL722 package adds the receiver-to-remote cable, the remote holster and the 12 V power cable, the GL722-10 leaves those three out, and the GL722IR has an infrared beam. Pick yours, then pair it with the tripod and grade rod you want.

±10% Xand -0.5% to +25% Y
3,000 ftworking diameter
750 ftRC703 remote range
2 yearsSpectra laser warranty

Remote: 750 ft for general operation, 500 ft for Automatic Axis Alignment. Self-levels across the whole grade range (Spectra GL700 user guide).

Spectra Precision Authorized Dealer logoGenuine Spectra Precision kits
Kit builder

Build your GL722

Every kit has the GL722 dual grade laser, the RC703 radio remote, the CR600 receiver, the NiMH battery pack, the charger and the carrying case. Pick your kit, then add the tripod and grade rod you want, and we will show you the whole kit and one price.

Choice 1

Pick your GL722 kit

Same laser, RC703 remote and CR600 receiver in all three. Choose the GL722 for the full package, the GL722-10 without the three extras, or the GL722IR for an infrared beam.

Tap a kit to start building.

MOST COMPLETE
Spectra Precision GL722 dual grade laser kit
Visible red beam
Laser, remote, receiver + 3 extras

Spectra GL722

  • GL722 laser, RC703 radio remote and CR600 rod / machine receiver
  • Adds the 1446-8801S receiver-to-remote cable, the 1446-8710 remote holster and the 12 V power cable
  • Red beam, 658 nm, Class 2
  • NiMH battery set, charger and carrying case
The full Spectra GL722 package.
CORE KIT
Spectra Precision GL722-10 dual grade laser kit
Visible red beam
Laser, remote and receiver

Spectra GL722-10

  • The same GL722 laser, RC703 remote and CR600 receiver
  • C50 rod clamp and C51 magnetic mount
  • Leaves out the connector cable, holster and 12 V cable
  • NiMH battery set, charger and carrying case
The GL722 package without the three extras.
INFRARED
Spectra Precision GL722IR dual grade laser kit
Infrared beam
Laser, remote and receiver

Spectra GL722IR

  • The same RC703 remote and CR600 receiver
  • Infrared beam: 785 nm, IEC Class 1, invisible
  • The CR600 reads 610 to 900 nm, so it finds the beam
  • For work where a visible beam is not permitted
The GL722 with an infrared beam.
Choice 2

Rod and tripod

Tripod
None
Aluminum
Fiberglass
Elevator
Rod
None
Aluminum
Fiberglass
The RC703 radio remote

Set and change grade from 750 feet away

The reason to buy a GL722. The RC703 is a two-way, 2.4 GHz digital radio remote, encrypted to its own laser. It works up to 750 ft from the laser for everyday work and 500 ft for automatic alignment, on two AA batteries for about 100 hours, even from inside the machine cab.

Automatic Axis Alignment

Rough the laser in to within 40 degrees of your point. Put the CR600 and the RC703 on a grade rod at the point, 60 to 500 ft away, and press one button: the laser turns its grade axis to the point and the remote confirms it. No ladder, no sighting to a grade hub.

Grade Match

Set the receiver at the height of the laser, go to your point and press a button: the laser changes grade on the chosen axis until the beam is centered on the receiver, then holds and shows the grade on the remote. One axis or both.

Grade Reverse and Grade Bump

Grade Reverse mirrors the grade with one press: the same slope, the other direction. Grade Bump raises or lowers the grade after setup. Both from the remote, without walking back to the laser.

From the Spectra Precision GL700 series user guide (Rev E, Feb 2025) and datasheet (09/23). PlaneLok is not listed for the GL722 in either, so we do not claim it.

Video

See every GL722 spec in under 3 minutes

Both grade axes, the RC703 remote, Automatic Axis Alignment, Grade Match, range, accuracy and the CR600: every number from Spectra’s GL700 documents, with English captions. Watch on YouTube

Jobs it’s built for

What the Spectra GL722 is used for

Spectra GL700 series grade laser applications: grading, excavation and site preparation; roads, runways and landfills; agricultural leveling and drainage; laser-based machine control; vertical alignment of anchor bolts and forms; sports fields, tennis courts, driveways and landscaping
General construction

Set cross-fall and run on two axes and change either one from the RC703 remote, so one person sets up and checks grade.

Build a kit for this job
Site preparation

Grade a pad on two axes from one setup, anywhere in a 3,000 ft circle. Grade Match picks up an existing slope without walking back to the laser.

Build a kit for this job
Road construction

Cross slope on X, run on Y. Automatic Axis Alignment lines the grade axis up with your point from up to 500 ft away.

Build a kit for this job
Parking lots and building pads

Drain in two directions at once: dial both grades from the remote and the laser self-levels to them.

Build a kit for this job
Grading and excavation

Grade Reverse mirrors the slope with one press, and Grade Bump nudges it after setup, from the remote or the cab.

Build a kit for this job
Laser machine control

Put the CR600 on the machine with its C51 magnetic mount, run 600 rpm (Spectra’s setting for most machine control) and change grade from the cab.

Build a kit for this job
Spectra GL722 dual grade laser with radio antenna on a tripod over a graded site with dozers working
Site grading. A GL722 with its radio antenna over a graded site, dozers working to the beam.
Spectra GL722 grade laser on a yellow tripod beside a CAT 320C excavator digging to grade on a red-clay site
Excavation. A Spectra GL722 on a tripod beside a CAT 320C excavator digging to grade.
Motor grader with a laser receiver mast grading to a Spectra GL722 laser on a tall tripod
Machine control. A motor grader with a receiver mast grades to a Spectra GL722 laser on a tall tripod.

Applications from the Spectra Precision GL700 series datasheet.

Every kit

The complete Spectra GL722 kit chart

Every current GL722 kit we sell, side by side.

Beam
3 kits match
KitWhat is in itPrice
GL722Spectra Precision GL722 Dual Grade Laser with RC703 Remote and CR600 ReceiverRC703 radio remote CR600 + C50 clamp + C51 magnet NiMH pack + charger Carrying case Connector cable + holster + 12 V cable$6,918.75View kit →
GL722-10Spectra Precision GL722-10 Dual Grade Laser with CR600 Laser Receiver and RC703 RC703 radio remote CR600 + C50 clamp + C51 magnet NiMH pack + charger Carrying case$6,395.00View kit →
GL722IRSpectra Precision GL722IR Dual Grade Laser with RC703 Remote and CR600 ReceiverRC703 radio remote CR600 + C50 clamp + C51 magnet NiMH pack + charger Carrying case Infrared beam, 785 nm$7,031.25View kit →

Every GL722 kit includes the laser, the RC703 radio remote, the CR600 receiver with the C50 rod clamp and C51 magnetic mount, the NiMH battery pack, the charger, the carrying case and the manual. Add a tripod and grade rod in the kit builder above.

Specifications

Spectra GL722 specifications

GradeDual: X axis -10% to +10%, Y axis -0.5% to +25%
Self-levelingAutomatic, across the whole grade range (up to 25%)
Working range3,000 ft (900 m) diameter
Accuracy3/64 inch at 100 ft (8 arc seconds); servo deadband 4.6 arc seconds; grade resolution 0.001%
Rotation speed300 / 600 / 900 rpm
LaserGL722 and GL722-10: red, 658 nm, Class 2. GL722IR: infrared, 785 nm, Class 1
Radio remoteRC703 two-way, 2.4 GHz digital, encrypted to its laser: 750 ft (225 m) general operation, 500 ft (150 m) automatic alignment; 2 x AA, about 100 hours
Remote functionsGrade change, Automatic Axis Alignment, Grade Match, Grade Reverse, rotation speed, manual and standby
ReceiverCR600 rod and machine receiver, 4.5 inch detection height; C50 rod clamp and C51 magnetic mount
PowerRechargeable NiMH pack (six D-cells); alkaline D-cells work as an emergency backup
Recharge time6 hours maximum
Operating temperature-4°F to 122°F (-20°C to 50°C)
WaterCompletely sealed and waterproof
Tripod mount5/8-11 standard
Warranty2 years, Spectra (calibration not covered)

From the Spectra Precision GL700 series datasheet (09/23), the CR600 user guide and the GL700 series user guide (PDF).

Questions

GL722 FAQ

Is the GL722 a dual grade laser with a radio remote?

Yes. It sets grade on two axes, X -10% to +10% and Y -0.5% to +25%, and the RC703 two-way radio remote changes and reads grade from up to 750 ft away (500 ft for automatic alignment), per Spectra.

Which GL722 kit should I buy?

All three have the GL722 laser, the RC703 radio remote, the CR600 rod and machine receiver with the C50 rod clamp and C51 magnetic mount, the NiMH battery set, the charger and the carrying case. The GL722 package adds the 1446-8801S receiver-to-remote cable, the 1446-8710 remote holster and the 12 V power cable; the GL722-10 leaves those three out; the GL722IR has a 785 nm infrared beam. Then add a tripod and a grade rod in the kit builder, or skip them if you have your own.

What can the RC703 remote do?

Change grade on either axis, run Automatic Axis Alignment and Grade Match, reverse the grade, change rotation speed, switch to manual and put the laser in standby, even from inside the machine cab. It is a two-way 2.4 GHz digital radio, encrypted to its own laser, and runs about 100 hours on two AA batteries.

How does Automatic Axis Alignment work?

Rough the laser in to within 40 degrees of your point, put the CR600 and the RC703 on a grade rod at the point (60 to 500 ft from the laser) and press one button on the remote: the laser turns its grade axis to the point and the remote confirms the alignment. No climbing up to sight the laser to a grade hub.

What is Grade Match?

Set the receiver at the same height as the laser, go to your remote point and press a button on the remote: the laser changes grade on the chosen axis until the beam sits in the center of the receiver, then stores and shows the grade. You match an existing slope without walking back to the laser.

Does the GL722 have PlaneLok?

PlaneLok is not listed for the GL722 in Spectra’s current GL700 user guide (Rev E, 2025) or datasheet (09/23), so we do not promise it. Automatic Axis Alignment, Grade Match and Grade Reverse are listed, and work from the RC703 remote.

What is the GL722IR?

The GL722 with an infrared beam: 785 nm, IEC Class 1. Spectra builds it for special applications where a visible beam is a safety hazard, distracting, or otherwise not permissible. The CR600 in the kit reads red and infrared lasers from 610 to 900 nm, so it picks up the beam.

How far does the GL722 reach?

3,000 ft (900 m) in diameter, the same as the rest of the GL700 series. The RC703 remote works up to 750 ft from the laser, and 500 ft for automatic alignment.

What rotation speed should I use?

The GL722 runs at 300, 600 or 900 rpm, and you can change speed from the remote. Spectra says to use 600 rpm for hand-held receivers and most machine-control systems.

GL722 or GL720?

Same range, accuracy and dual grade. The GL722 adds the RC703 radio remote, Automatic Axis Alignment and Grade Match, and its kits come with the CR600 rod and machine receiver. The GL720 has no remote. For one grade axis, the GL710.

Does the GL722 run on rechargeable batteries?

Yes. Every GL722 kit ships with the 1445-2900 NiMH battery set and the 1445-2093 charger. Alkaline D-cells can be used as an emergency backup, and recharging takes up to 6 hours.

Inches or tenths rod?

Inches (feet, inches and eighths) is what most building and concrete crews read. Tenths (feet, tenths and hundredths) is common in site work and surveying.

What warranty does the GL722 have?

Two years from Spectra on the laser and the RC703 remote. Calibration is not covered by the warranty and is the owner responsibility. The CR600 receiver has a 2-year Spectra warranty. Contractors-Tools.com is an authorized Spectra Precision dealer.

Spectra Precision Authorized Dealer logo
Not sure which GL722 kit fits your crew?

Tell us the work you do and we will match the kit, rod and tripod before you order. Real people, real laser experience.

Call 1-877-866-5721
Authorized Spectra dealerGenuine Spectra Precision kits
Family ownedand operated
Same-day shippingorder by noon Central
2-year warrantyon the GL722 laser

Contractors-Tools.com

Experience the value of Great Customer Service!

View as: