Dial a grade into the Y axis from -0.5% to +25% and the GL710 self-levels to it. Read it as a number on the HL700 digital readout receiver. Levels to 3/64″ at 100 ft across a 3,000 ft working diameter.
Questions? Talk to someone who uses these: 1-877-866-5721
Spectra Precision GL710 Single Slope Rotary Laser – Built for Big Grade Work
The Spectra GL710 isn’t just a rotary laser — it’s a grading weapon built for serious dirt work. Whether you’re cutting slope for drainage, building large pads, or fine-tuning elevation across long distances, the GL710 delivers dead-on accuracy with the muscle to cover a 3,000 foot working diameter when paired with a receiver like the HL700 or CR600.
Built for Big Jobs
With a massive 1,500 foot working radius, the GL710 is made for road crews, utility runs, large sites, and anyone moving dirt across distances where most lasers fall short.
Single Slope, Dialed In
Dial in single-axis slope from -0.5% to +25% with pinpoint control. The beam stays stable even on rough terrain, so you don’t waste time chasing grade.
Tank-Tough Durability
Jobsite-tested with a fully sealed, waterproof aluminum housing, the GL710 shrugs off rain, dust and daily abuse.
Laser-Guided Accuracy
Levels to 3/64 inch at 100 feet (8 arc seconds), perfect for critical grade checks and layout. You’ll trust your numbers, not guess them.
All-Day Runtime
Get about 30 hours of runtime on the rechargeable NiMH pack, and six alkaline D-cells keep you working in an emergency.
No Guesswork, No Downtime
Simple keypad setup, bright beam visibility, and variable rotation speed (300, 600, or 900 RPM) mean you can adapt quickly to changing site conditions and stay productive.
When your job demands accuracy over acreage, the Spectra GL710 delivers. It's the go-to grade laser for excavators, pad builders, concrete crews, and heavy grading contractors who need range, reliability, and ruggedness — no gimmicks, just results.
What’s in the Box
What You Receive.
Spectra Precision GL710 Laser Package INCLUDES
GL710 Single Grade Laser
-0.5% to +25% on the Y axis, 3/64 in at 100 ft, 300/600/900 rpm, 3,000 ft diameter.
The current 2025 GL700 user guide is also downloadable below, in English and Spanish.
2-Year Warranty
Spectra warranty on the GL710 laser, materials and workmanship. Calibration is the owner’s job. The HL700 receiver carries 3 years.
GL710
This is Spectra’s own GL710 package: the GL710 laser with the HL700 receiver and C70 rod clamp, NiMH battery set, charger and carrying case. We customize kits so you get what you need to complete the job.
Working off a machine, not just a rod? The GL710-14 is the same GL710 laser with the CR700 rod and machine receiver, C70 rod clamp and C71 magnetic mount. $4,710.00See the GL710-14 · See every GL710 kit ↓
Kit builder
Add a tripod and grade rod. Build this kit.
Our GL710 kit builder opens with the HL700 already picked. Choose an aluminum, fiberglass or elevator tripod and a grade rod in inches or tenths, and see the whole kit at one price.
Type the grade into the Y axis and the laser self-levels to it, anywhere from -0.5% to +25%.
One setup covers the whole site
Work up to 1,500 ft from the laser in every direction: a 3,000 ft circle from one tripod.
It knows when it has been bumped
The HI alert stops the laser if the tripod moves, so nobody grades to a bad number.
The pairing
The laser sets the grade. The HL700 reads it.
GL710
It puts the grade up.
Single grade. Enter a grade on the Y axis from -0.5% to +25%; it self-levels to it.
3/64″ at 100 ft leveling accuracy (8 arc seconds), 0.001% grade resolution.
300 / 600 / 900 rpm. Use 600 for hand-held receivers and most machine control.
Active temperature compensation keeps the plane steady as the day warms up.
HI alert: bump the tripod and it stops instead of letting you work off a bad setup.
Fully sealed, waterproof aluminum housing with a protective lens hood.
HL700
It tells you the number.
A 5″ detection height with a digital readout: the exact distance from on-grade over the middle 4″, not just an arrow.
Five accuracy settings, from Ultra Fine 1/32″ to Coarse 1/2″.
Waterproof and dustproof to IP67; 60+ hours on two AA batteries.
Ships with its C70 rod clamp. 3-year Spectra warranty.
What the two of them do together
The GL710 holds one grade across a 3,000 ft circle; the HL700 on the grade rod tells the crew exactly how far above or below that grade they are, as a number. One person sets up the laser, dials the grade and checks it on the rod. No radio remote is needed and none is included: that is the GL722.
What you get
Laser, receiver and power
Laser
The GL710 single grade laser with its 1445-2900 NiMH battery set and the 1445-2093 worldwide charger.
Receiver
The HL700 digital readout receiver with its C70 rod clamp.
Case
The rugged waterproof carrying case and the manual.
Everything you need to set grade on day one.
The technical edge
Grade you never have to calculate
Single grade
Type the grade into the Y axis; the laser self-levels to it.
Temperature compensation
Active compensation keeps the plane where you set it.
Axis alignment buttons
Rotate the grade axis from the keypad for fine aiming at a hub.
Less math at the stake, fewer re-shoots.
What sets it apart
Range and stability for big sites
3,000 ft circle
One setup covers a large site; the range belongs to the laser, not the receiver.
HI alert
Knock the tripod and the laser and rotor shut down, so nobody digs to a bad number.
Set it up once and trust it all day.
Free Same-Day Shipping · Order by noon central and it ships today. Call 1-877-866-5721 for express and next-day options. · Two-year Spectra laser warranty
On the job. Spectra GL710 grade laser on a tripod at an excavation site.
Key Features
Built for Long Range and One Steady Grade.
SPECTRA Precision GL710 Grade Laser FEATURES
Range
3,000 foot operating range
Accuracy
3/64 inch accuracy at 100 feet
Self-leveling
Self-leveling
Single grade
Single grade from –0.5 to +25%
Your choice
Choice of receiver; rechargeable with alkaline backup
Temperature
Automatic temperature compensation
Rotation
Selectable rotation speeds
Machine control
Ideal for machine control
Rugged
Fully sealed aluminum housing
Weather
Protective lens hood
Display
Large display
Mounting
5/8-11 tripod thread
Easy to learn
Intuitive, simple controls
Simple keypad, large display. Power, manual mode, grade up and down, rotation speed and the axis-alignment buttons, under a protective lens hood.
Applications
Where This Laser Earns Its Keep.
General construction
Building pads, footings and slabs off one plane, set up by one person.
Site preparation
Set one grade across the pad and check it anywhere within 1,500 ft.
Trenching
Dial the fall into the Y axis, -0.5% to +25%, and dig to the beam.
Pipe laying
Hold the same grade along the run; temperature compensation keeps it steady.
Grading and excavation
Cut and fill read off the rod, or from the cab with a machine receiver.
Road, runway and landfill
Long runs where range from one setup matters.
Agricultural leveling and drainage
Fine grade resolution (0.001%) for drainage slopes over big fields.
Laser machine control
Works with laser-based machine control; run 600 or 900 rpm.
Excavation and trenching. Spectra GL710 grade laser on a tripod with a backhoe digging behind it.Site grading. Spectra GL710 grade laser set up for site grading with a motor grader.
Applications from Spectra’s GL700 series datasheet and our GL710 listing.
VIDEO
See It On the Job.
Our GL710 spec walkthrough: range, grade, accuracy, power, receivers and kits, every number from Spectra’s documents.
How It Works
Power On, Dial the Grade, Go to Work.
The GL710 has one display and a short keypad. It always powers up self-leveling, and it remembers the last grade you entered.
1
Turn it on
Press power. The display shows battery charge, rotation speed and the last grade. The status LED flashes green while it self-levels; the beam starts turning when it is level.
2
Dial the grade
Hold the up or down button until the grade you want shows. Hold longer and it moves faster. Hold both to jump to 0.000% and step in larger increments. Grades show to 0.001% up to 9.999%.
3
Pick the speed
Press the rotation button for 300, 600 or 900 rpm. Spectra: 600 rpm for hand-held receivers and most machine control.
4
Aim the axis
The axis-alignment buttons turn the grade axis clockwise or counterclockwise electronically, like turning the laser on its tripod, with fine adjustment.
5
Let the HI alert watch it
After 15 minutes level the HI alert arms. If the tripod is bumped and the beam moves more than 1/8″, the laser shuts down the beam and rotor and the LED flashes red twice a second.
Manual mode
Press manual to bypass self-leveling: tilt the beam past the built-in grade range or work in vertical mode. The LED flashes red once a second. Press it again to go back to automatic.
Out of range?
If the laser sits outside its self-leveling range for more than 10 minutes, it shuts itself off. It also shuts off after 30 minutes if it cannot level.
Turning it off
Press and hold power for 3 seconds.
Steps from the Spectra Precision GL700 Series user guide, Rev E (Feb 2025). It is under Downloads.
The Receiver
The HL700 Gives You the Number.
Spectra Precision Laser HL700 Laser Receiver Highly versatile laser receiver for everyday and advanced leveling and aligning applications
The Spectra Precision® HL700 Laserometer, a highly versatile laser receiver for everyday and advanced leveling and aligning applications, is designed for general, concrete and site preparation contractors. The HL700 Laser Receiver is an easy-to-use tool that accurately measures elevations across the site.
The HL700 Laser Receiver features a digital readout of elevation that provides a numeric display of +/- 5 cm (+/- 2 inches). The readout is displayed on the large front and rear LCD's and shows exactly how far the elevation is from on-grade. Accurate measurements can be made without moving the rod clamp, saving time and increasing productivity. Selectable units of measure can be displayed meeting your application - mm, cm, ft, in or fractional inches
Features for the Spectra Precision HL700 Laser Receiver
Digital readout of elevation - not only will high or low arrows be displayed, but the exact distance from grade will be numerically displayed, which eliminates the need to get "on-grade" to make measurements.
Large 5-inch reception height acquires the beam quickly and makes it easy to stay in the beam.
Strobe-light rejection: the lower sensitivity setting helps it ignore construction strobe lights.
Front LED grade indicators: green on-grade, red high, blue low, with bright, dim or off settings.
CAPTURE function remotely captures and retains a measurement when the display is difficult to see.
Multiple deadband setting allows adaptation to meet all your jobsite requirements.
Waterproof and dustproof to IP67.
Two clamp positions on the C70: normal (center) and offset.
HL700
Included in this package
Laser detection height
5 inch (127 mm)
Numeric readout height
4 inch (102 mm), the middle of the window
Accuracy settings
5: Ultra Fine 1/32″, Super Fine 1/16″, Fine 1/8″, Medium 1/4″, Coarse 1/2″
Working radius
3 ft to 1,500 ft (laser dependent)
Reception angle
±45° minimum
Beeper
Loud 110 dBA, Medium 95 dBA, Low 65 dBA
LED grade indicators
Front: green on-grade, red high, blue low
Power / battery life
2 x AA, 60+ hours
Automatic shut off
30 minutes
Environmental
Waterproof, dustproof to IP67
Operating temperature
-4°F to 140°F
Weight (no clamp)
13.1 oz (371 g)
Warranty
3 years, Spectra Precision
Specifications from the Spectra Precision HL700 datasheet and the GL700 series datasheet. Working radius depends on the laser: the GL710 gives 1,500 ft.
Hover any photo to enlarge it.
Receiver upgrade opportunity
Step up to the GL710-14 with the CR700
The same GL710 laser, rechargeable pack, 1445-2093 charger and case, with the CR700 rod and machine receiver in place of the HL700.
Works on a grade rod and on a machine: the C71 magnetic machine mount ships with it, plus the C70 rod clamp.
The same 5″ capture height as the HL700.
Numeric readout of how far off grade you are, plus bright blue / green / red grade LEDs.
Waterproof and dustproof to IP67.
The CR700’s radio features (Grade Match, PlaneLok and Axis Alignment) need a radio laser and do not work with the GL710; with the GL710 it works as a rod or machine receiver.
3,000 ft (900 m) · 1,500 ft (460 m) radius with a receiver
Grade range
-0.5% to +25%, single axis (Y)
Grade resolution
0.001%
Self-leveling range
Up to ±14° (the whole grade range)
Rotation speeds
300, 600, 900 rpm
Laser
658 nm, IEC Class 2, 3.5 mW
Power source
NiMH, 6 x D-cell; alkaline D-cells for emergency backup; external 12 V power cable optional
Battery life
About 30 hours (NiMH, at 70°F)
Recharging time
6 hours maximum
Low-battery warning
Status LED flashes yellow: under 1 hour left
Automatic shutoff
30 minutes if unable to level
Operating temperature
-4°F to 122°F (-20°C to 50°C)
Storage temperature
-40°F to 140°F (-40°C to 60°C)
Water resistance
Completely sealed and waterproof
Tripod thread
5/8-11 (3 1/2-8 and quick-disconnect optional)
Size (L x W x H)
7.75 x 10.0 x 11.75 inch (20 x 25 x 30 cm)
Weight
18.5 lb (8.4 kg)
Radio remote
No (the GL722 has it)
Warranty
2 years, Spectra Precision (calibration not covered)
From the Spectra Precision GL700 series datasheet (09/23) and user guide (Rev E, Feb 2025).
Read This First
Two Things Worth Knowing.
Power: rechargeable, with an alkaline backup
The 1445-2900 NiMH battery set runs about 30 hours and recharges in 6 hours maximum on the 1445-2093 charger. When the status LED flashes yellow there is under an hour left; solid yellow means under 5 minutes. Forgot to charge? Six alkaline D-cells run it as an emergency backup, and the optional 12 V external power cable runs it off a vehicle battery. Never try to recharge alkalines.
Check calibration before the job, and after any rough handling
Spectra says to check it at the start of each job and whenever the laser has been handled roughly, and in the cold if you work below freezing. The wall check at 300 ft and the keypad adjustment are step by step in the user guide. The 2-year warranty does not cover calibration; keeping it calibrated is the owner’s job.
Compare the Kits
Which GL710 Do You Need?
All three GL710 kits use the same GL710 laser, 1445-2900 NiMH set, charger and case. The difference is the receiver: the HL700 for a grade rod; the CR600 or the CR700 for a rod or a machine.
Swipe the chart sideways to see every column →
Kit
Receiver
Also includes
Price
GL710 YOU ARE HERE
HL700 rod receiver
1445-2900 NIMH SET1445-2093 CHARGERC70 ROD CLAMPCARRYING CASE
1445-2900 NIMH SET1445-2093 CHARGERC70 ROD CLAMPC71 MAG MOUNTCARRYING CASE
$4,710.00
Want something that is not pre-built?
Pick any receiver, tripod and rod. Build your own GL710 kit.
Start the GL710 kit builder: choose the HL700 or CR600, then an aluminum, fiberglass or elevator tripod and a grade rod in inches or tenths. You see the whole kit at one price.
Prices are live from our store. Every GL710 carries the 2-year Spectra laser warranty. Need a combination you do not see? Call 1-877-866-5721.
GL700 Series Comparison
How the GL710 Compares.
Same range, accuracy and Y-axis grade across the GL700 series. The GL720 adds a second grade axis; the GL722 adds the RC703 radio remote, Automatic Axis Alignment and Grade Match.
From the Spectra Precision GL700 series datasheet (09/23).
Reading the Lights
What the LEDs Are Telling You.
Status LED flashing green
Self-leveling (out of level). The beam starts rotating when it is level.
Status LED flashing red, once a second
Manual mode: the laser is not self-leveling.
Status LED flashing red, twice a second
HI alert: the setup moved. Check your elevation, then turn the laser off and on to clear it.
Status LED flashing yellow
Low battery: under one hour of running time. Solid yellow: under 5 minutes.
Status LED solid red
An internal, electronic or mechanical error. See the error codes under Troubleshooting below.
Charger: left off, right on
Charging. Left flashing, right off: charge complete. Both flashing: charging error. Both off: no connection or no batteries.
From the Spectra Precision GL700 series user guide, Rev E (Feb 2025).
QUESTIONS & ANSWERS
GL710 Questions We Actually Get.
Grouped so you can find yours. Buying questions first, then how to work it, then what to do when something is wrong. Answers from Spectra’s GL700 documents.
Before You Buy 11
What is the Spectra GL710?
The Spectra Precision GL710 automatic single grade laser packaged with the HL700 digital readout receiver and C70 rod clamp, the 1445-2900 NiMH battery set, the 1445-2093 worldwide charger, the carrying case and the manual.
What is the grade range on the GL710?
Single axis, -0.5% to +25% on the Y axis. There is no second grade axis on a single grade laser; for grade on two axes at once, look at the GL720 or GL722.
Can I enter a slope percentage, like 2%?
Yes. The GL710 is an automatic single grade laser: hold the up or down button until the grade shows, and it self-levels to it. You do not tilt it by hand.
How accurate is the GL710?
Leveling accuracy is 3/64 inch at 100 ft (1.2 mm at 30 m, 8 arc seconds), with 4.6 arc second servo deadband accuracy and 0.001% grade resolution, per Spectra.
How far does it reach?
3,000 ft (900 m) in diameter: about 1,500 ft from the laser in every direction with a receiver. The range belongs to the laser, the same across the GL700 series.
Does it have a radio remote, Grade Match or Automatic Axis Alignment?
No. Those are GL722 features. The GL710 is the straightforward grade laser: set it up, dial the grade, work to it.
HL700, CR600 or CR700: which kit should I buy?
The GL710 kit with the HL700 if you check grade from a grade rod: its digital readout shows how far off grade you are as a number. For a receiver that also goes on a machine, the GL710-14 with the CR700 adds a numeric readout, a 5-inch capture height and a 3-year warranty; the GL710-10 with the CR600 is the other rod-and-machine kit. Both machine kits come with a rod clamp and a magnetic mount.
Will a CR700 run Grade Match or PlaneLok on the GL710?
No. The CR700 radio features (Grade Match, PlaneLok, Axis Alignment and Fingerprint) need a radio laser and do not work with the GL710. With the GL710 the CR700 works as a rod or machine receiver.
How long does the battery last?
About 30 hours on the 1445-2900 NiMH battery set at 70°F, and recharging takes 6 hours maximum. Six alkaline D-cells work as an emergency backup, and an optional 12 V cable runs it off external power.
What is the warranty?
2 years from Spectra on the GL710 laser (calibration not covered). The HL700 and CR700 receivers carry 3 years and the CR600 2 years.
Where can I buy it?
Contractors-Tools.com is an authorized Spectra Precision dealer. Call 1-877-866-5721.
Using It 5
What rotation speed should I use?
Spectra recommends 600 rpm for hand-held receivers and most machine-control systems. The GL710 also runs 300 and 900 rpm; faster speeds update a machine display more often.
What is the axis-alignment button for?
It rotates the grade axis clockwise or counterclockwise electronically, which simulates turning the laser on its tripod, with fine adjustment, so you can aim the grade at a hub.
Can I use it in vertical?
Yes, in manual mode: it bypasses self-leveling so the laser can work in vertical mode, or tilt past its built-in grade range. On a tripod, vertical setup needs an after-market vertical mounting bracket, per the GL700 user guide. Press manual again to go back to automatic.
What happens if someone bumps the tripod?
After the laser has been level for 15 minutes the HI alert is armed. If a bump moves the beam elevation more than 1/8 inch, the laser shuts down the beam and rotor and the status LED flashes red twice a second.
How do I check calibration?
Set up 300 ft from a wall, mark the beam, turn the laser 180 degrees and compare, per the GL700 user guide. Check at the start of each job and after rough handling. The adjustment is done from the keypad.
Troubleshooting 7
The laser will not turn on.
Make sure the batteries are charged and installed correctly, and that the battery contacts are clean and in good condition.
There is no laser beam.
Make sure the laser is on and the batteries are charged, and that the laser is within its self-leveling range (up to 25%). Switching to manual mode should bring the beam on.
The receiver is not picking up the beam.
Make sure the receiver is on with good batteries and within the operating range, and check that the laser is sending a beam. Try another receiver to rule it out.
The battery life is short.
Charge with the charger plugged into a proper AC outlet for at least six hours, and use good batteries. Cold weather shortens battery life significantly.
The laser beam is not accurate.
Check and adjust calibration as described in the user guide. If it still reads wrong, return it to an authorized Spectra Precision service center.
The status LED flashes red twice a second.
That is the HI alert: the setup moved and the beam may be at the wrong elevation. Check your setup and elevation, then clear it by turning the laser off and on.
What do error codes 0004 through 8000 mean?
They are GL700 laser error codes for a hardware or software problem: 0004, 0008, 0010, 0020, 0040, 0080, 0100, 0200, 0400, 0800, 1000, 2000, 4000 and 8000. If one shows on the laser display, return the laser to an authorized Spectra Precision service center. Call us at 1-877-866-5721 and we will help.
Error Codes, One by One 14
Error code 0004 on the GL710 display?
Error 0004 is one of the GL700 laser codes for a hardware or software problem. Spectra says to return the laser to an authorized Spectra Precision service center. Call 1-877-866-5721.
Error code 0008 on the GL710 display?
Error 0008 is one of the GL700 laser codes for a hardware or software problem. Spectra says to return the laser to an authorized Spectra Precision service center. Call 1-877-866-5721.
Error code 0010 on the GL710 display?
Error 0010 is one of the GL700 laser codes for a hardware or software problem. Spectra says to return the laser to an authorized Spectra Precision service center. Call 1-877-866-5721.
Error code 0020 on the GL710 display?
Error 0020 is one of the GL700 laser codes for a hardware or software problem. Spectra says to return the laser to an authorized Spectra Precision service center. Call 1-877-866-5721.
Error code 0040 on the GL710 display?
Error 0040 is one of the GL700 laser codes for a hardware or software problem. Spectra says to return the laser to an authorized Spectra Precision service center. Call 1-877-866-5721.
Error code 0080 on the GL710 display?
Error 0080 is one of the GL700 laser codes for a hardware or software problem. Spectra says to return the laser to an authorized Spectra Precision service center. Call 1-877-866-5721.
Error code 0100 on the GL710 display?
Error 0100 is one of the GL700 laser codes for a hardware or software problem. Spectra says to return the laser to an authorized Spectra Precision service center. Call 1-877-866-5721.
Error code 0200 on the GL710 display?
Error 0200 is one of the GL700 laser codes for a hardware or software problem. Spectra says to return the laser to an authorized Spectra Precision service center. Call 1-877-866-5721.
Error code 0400 on the GL710 display?
Error 0400 is one of the GL700 laser codes for a hardware or software problem. Spectra says to return the laser to an authorized Spectra Precision service center. Call 1-877-866-5721.
Error code 0800 on the GL710 display?
Error 0800 is one of the GL700 laser codes for a hardware or software problem. Spectra says to return the laser to an authorized Spectra Precision service center. Call 1-877-866-5721.
Error code 1000 on the GL710 display?
Error 1000 is one of the GL700 laser codes for a hardware or software problem. Spectra says to return the laser to an authorized Spectra Precision service center. Call 1-877-866-5721.
Error code 2000 on the GL710 display?
Error 2000 is one of the GL700 laser codes for a hardware or software problem. Spectra says to return the laser to an authorized Spectra Precision service center. Call 1-877-866-5721.
Error code 4000 on the GL710 display?
Error 4000 is one of the GL700 laser codes for a hardware or software problem. Spectra says to return the laser to an authorized Spectra Precision service center. Call 1-877-866-5721.
Error code 8000 on the GL710 display?
Error 8000 is one of the GL700 laser codes for a hardware or software problem. Spectra says to return the laser to an authorized Spectra Precision service center. Call 1-877-866-5721.
PARTS & ACCESSORIES
Buy the Piece, Not Another Kit.
Every part of the GL710 package we sell on its own, plus the add-ons that fit it. If you are one piece short, buy the piece.
Questions about the GL710? Family owned and operated. We set these systems up every week — tell us the job and the laser you are running and we will spec it before you order.