LEICA PIPER 100
Line and grade in the pipe, over the top or in the manhole.
The Leica Piper 100 works inside a 4 in pipe, over the top or in the manhole: red beam, grade from -10% to +25%, up to 650 ft.
LEICA PACKAGE748704

Leica Piper 100 Kit — Package 748704






The world’s most versatile pipe lasers

Solid performance in the pipe, over the top or in the manhole. A rugged cast-aluminium Piper that keeps working in tough jobsite conditions, sized to go where a pipe laser has to go.




Bright red beam
A focused red 635 nm beam that keeps a crisp, clear spot over long distances. Working long runs in bright sun? The Piper 200G green beam is about four times more visible, according to Leica.
Compact and rugged
One of the smallest pipe lasers on the market, built to fit inside a 100 mm / 4 in pipe, in a cast-aluminium housing sealed to IPX8. Roll the housing up to ±3° and automatic grade compensation corrects the grade error for you.
Leica laser experience
Leica Geosystems has built construction lasers longer than anyone in the market, and backs the Piper with factory service and support through an authorized distributor like us.
Long-range precision
Up to 200 m / 650 ft of working range with ±1/16" at 100 ft self-levelling accuracy, in sun, rain or the bottom of a wet trench.
In the pipe, over the top, in the manhole
In the Pipe
Piper's self-centering, rubber tipped feet and robust, cast-aluminium housing assures the highest reliability in pipeline construction.
Over the Top
In above-ground tasks, the optional scope and the mount kit provide user-friendly solution for simple setup and operation.
In the Manhole
In manhole applications, Piper's unique design and wide stable base make it easy to set up even in the tightest inverts.
Leica Piper 100 - 748704
RED BEAM PIPE LASER with LASER PLUMB REFERENCE
THE NEW STANDARD - World's most versatile and accurate pipe laser
The most versatile pipe lasers in the market, the Leica Piper 100 brings exceptional performance, accuracy and simplicity to sewer construction and pipe applications. The compact Piper fits inside a 4 inch pipe, assuring easy and efficient setup even in the smallest inverts.
High application versatility
Piper is 100% waterproof (sealed to IPX8 protection standard) and has a positive pressure nitrogen seal to deliver the ultimate reliability.
LEICA PIPER 100 RED BEAM PIPE LASER HITS THE TARGET EVERY TIME
Piper is ideal anywhere line and grade is required.
Large clear display for easy grade reading. Line position, battery status and level indication.
Piper's bright, visible beam is focused to maintain its crisp, clear spot and size over long distances.
Automatic grade compensation easily identifies and corrects grade errors. Piper automatically self-levels over a full grade range and eliminates the need to tip the laser for steep slopes.
Increased productivity with smart features
Piper 100 provide pipe and sewer contractors with smart, user-friendly features for enhanced application performance.
Strobe Mode - its multi-functional remote control strobes the laser beam for increased visibility.
Top pivot point (Lighted Pivot Point) and Battery Saving Mode.
Solid performance in the pipe, over the top or in the manhole. The Leica Piper series helps you to work with confidence having the perfect instrument for your application and need. Built with a rugged aluminum housing, these pipe lasers perform powerfully even in tough job-site conditions.
Want automatic targeting?
The Piper 100 is lined up on the target by hand. If you set up on the same run day after day, the Piper 200 and Piper 200G add Alignmaster, Leica’s patented automatic targeting: the laser searches for the target and lines itself up on it, so second-day setups take a fraction of the time.
Five keys run the whole laser
The keypad from the Leica Piper user manual. The display above it shows the grade, battery, and line and grade lock.

Piper 200 keypad shown. The Piper 100 has the same keys except the Alignmaster button (d).
- aLeft and Right Line buttonsMove the line left or right to put the beam on the target.
- bUp and Down Grade buttonsChange the grade in small steps.
- cPower buttonTurns the Piper on and off.
- dAlignmaster button (Piper 200 only)Fitted to the Piper 200 and 200G only. The Piper 100 is lined up on the target by hand with the Line buttons.
- eStar buttonUsed with the Grade buttons for large grade changes: press star, then enter the grade digit by digit.
The Leica 746157 IR remote
Run the Piper from the far end of the pipe: up to 150 m / 500 ft in front of the laser, 10 m / 35 ft behind it. Button functions from the Leica Piper user manual.

- aLeft and Right Line buttonsInitial alignment, and centring the beam in the pipe for second-day setups.
- bSleep / Standby buttonPuts the Piper in stand-by with only the display showing the sleeping Piper icon. It stays in stand-by for up to 72 hours, then shuts off completely.
- cAlignmaster button (Piper 200 only)Works with the Piper 200 and 200G only; on this Piper 100 it does nothing.
- dStrobe buttonMakes the beam strobe or flash very rapidly, creating a brighter beam for viewing the target.
- ePivot Light buttonTurns on the pivot point light for better visibility when setting up the Piper in the manhole.
- fSending LEDFlashes to show the remote is sending a signal to the Piper.
How a Piper setup works
From Leica’s Piper demonstration: set the line, set the elevation, enter the grade, align the beam.
Video: Leica Geosystems, on the Contractors Tools YouTube channel.
- Set it on the line. Position the Piper on the centreline of the proposed or existing pipeline. The self-centering, rubber-tipped feet keep it aligned inside the pipe.
- Set the elevation and turn it on. Establish the correct elevation and switch the Piper on. During start-up it shows the battery status, and the owner’s name if one is stored, for security.
- Enter the grade. The main screen shows the grade in large, clear numbers. Use the up and down arrows for small changes; for a larger grade, press the star button and enter it digit by digit.
- Align the beam. Steer the beam onto the target with the buttons on the laser or with the remote from the far end of the pipe.
- Let it hold grade. Cross-axis grade compensation keeps the Piper on grade even when it is rolled up to ±3°, and icons on the display show battery status and line and grade lock.
The three settings behind every pipe run
Every Piper setup comes down to three numbers. Definitions from the Leica Piper user manual.

Line
The position of the laser beam relative to the centreline of the pipe being laid. Set the line by aligning the beam with the next manhole, using the Left and Right Line buttons or the remote.

Grade
The amount of rise and fall over the distance of the pipe being laid. Set the grade by entering the percentage on the Piper’s display, anywhere from -10% to +25%, and the laser tilts the beam to match.
Leica Piper 100 features
Compact and Powerful
The pipe laser that fits inside a 4-inch pipe
Automatic Grade Compensation
With the housing rolled up to ± 3°, the Piper will compensate and correct for the grade errors.
Heavy-Duty trivet
With easy grip handle, heavy base and clear markings on the pole to adjust and set the height.
Multiple function remote
Works up to 500-feet for line control and other features
Updated LCD Display
Even easier to read menu, with a bright, LCD Display
Tough and Reliable
Make Adjustments from afar with the 746157 Remote Control
More smart functions
- Laser "standby" to save battery power
- Auto-Centering
- Grade Match for quick grade reference and elevation matching
Leica 746157 remote control features
- Beam mode to manage brightness
- Auto-Centering Grade Match for quick grade reference and elevation matching
Specifications
Leica Piper Series data sheet (939945en, 12.20). Battery times depend on conditions.
| Laser beam | Red, 635 nm |
| Laser class | 3R (max. average radiant power 4.75 mW) |
| Working range | Under 200 m / 650 ft |
| Grade range | -10% to +25% |
| Self-levelling range | -15% to +30% |
| Automatic grade compensation | Housing rolled up to ±3° |
| Line movement | 6 m at 30 m / 20 ft at 100 ft |
| Self-levelling accuracy | ±1.5 mm at 30 m / ±1/16" at 100 ft (at 25°C / 77°F) |
| Auto-targeting (Alignmaster) | No |
| Wireless remote distance | Front 150 m / 500 ft, back 10 m / 35 ft |
| Battery | Li-Ion, up to 40 h |
| Charging time | 4 h |
| Operating temperature | -20°C to +50°C / -4°F to +122°F |
| Dimensions (diameter × length) | 96 mm × 267 mm / 3.9 in × 10.5 in |
| Weight | 2.0 kg / 4.4 lb |
| Housing | Cast aluminium |
| Protection class | IPX8 |
Every Leica Piper pipe laser package we sell
Pick the laser (Piper 100, or Piper 200 / 200G with Alignmaster), the beam colour, and whether you want the remote in the box.
| Package | Laser | Remote | Our price |
|---|---|---|---|
| Piper 100 · Red beam | |||
| 6000230 | Piper 100 | No remote (sold separately) | $4,634.00 |
| 748704 You are here | Piper 100 | 746157 IR remote included | $4,895.00 |
| Piper 200 · Red beam · Alignmaster | |||
| 6000231 | Piper 200 | No remote (sold separately) | $5,575.00 |
| 748710 | Piper 200 | 746157 IR remote included | $5,765.00 |
| Piper 200G · Green beam · Alignmaster | |||
| 6016959 | Piper 200G | No remote (sold separately) | $6,150.00 |
| 6016958 | Piper 200G | 746157 IR remote included | $6,395.00 |
Every package: laser, in-pipe target (red 725858 on the Piper 100 and 200, blue 915443 on the 200G), 6 in self-centering feet, Li-Ion battery, charger and hard case. Prices are live from the store.
Feet for your pipe size: what comes in the box, and what is optional
The feet hold the Piper on the centreline of the pipe, and their length sets the elevation for that pipe size. The drawings show the same Piper centred in pipe from small to large diameter, and the five feet lengths from 6 in to 12 in.


In the box with every Piper
Self-centering feet, 6 in / 150 mm (Leica 746161), set of 4. These fit 150 mm / 6 in pipe.
Laying 100 mm / 4 in pipe? Take the feet off completely; the Piper sits in the pipe on its own body.
Optional, for larger pipe
Leica makes feet for 200 mm (8 in), 225 mm (9 in), 250 mm (10 in) and 300 mm (12 in) pipe. Each is sold as a single foot; the Piper stands on four, so order four for a set.
- 746162, 8 in foot · $21.60
- 746163, 9 in foot · $21.60
- 746164, 10 in foot · $21.60
- 746165, 12 in foot · $21.60
- Replacement 6 in foot: 746161, 6 in foot · $21.60
Every size at once: the Leica 748900 Deluxe Accessory Kit (748900) has full sets of four in 8, 10 and 12 in, the large red target insert and a spare battery.
The Leica 746158 trivet: why you want one


The trivet is not included in any Piper package. It is the stand that holds the Piper off the invert, for manhole and trench setups and for setting elevation by height instead of by feet.
Sets the beam height
The trivet holds the Piper at a set height above the invert, so you can set elevation when the feet alone are not enough, in the manhole or in a trench.
Solid on rough ground
A heavy base that stays put on rock and mud, so the beam stays where you set it.
Easy to read and adjust
An easy-grip handle and clear markings on the pole for setting and resetting the height (Leica data sheet).
Faster to the target
Leica: the heavy-duty trivet helps guide the beam to the target faster.
Leica 746158 Trivet Assembly with Mounting Bracket · $675.00
Piper accessories
Targets, battery, charger, remote, trivet and case for the Leica Piper 100. Prices are live from the store.

Leica 748900 Deluxe Piper Accessory Kit
Full sets of four self-centering feet in 8 in, 10 in and 12 in, the large target insert for 15 to 21 in pipe, and a spare GEB221 Li-Ion battery. One kit and the Piper is ready for most pipe on the job, with a second battery in the truck. Leica 748900 · $775.00






